FAQ
Frequently Asked Questions
Ready-to-ship stock ships from low minimums — 1–2 pcs depending on the model, and mixed batches are accepted. Adding your logo to a stock colourway starts at 50 pcs per colour. An ODM colour outside the stock range starts at 300 pcs per colour, with up to two colours per order. Custom production runs around 40 days after artwork and sample approval.
Ready-to-ship stock ships from low minimums — 1–2 pcs depending on the model, and mixed batches are accepted. Adding your logo to a stock colourway starts at 50 pcs per colour. An ODM colour outside the stock range starts at 300 pcs per colour, with up to two colours per order. Custom production runs around 40 days after artwork and sample approval.
Ordering & minimums
What is your minimum order quantity?
Ready-to-ship stock ships from low minimums — 1–2 pcs depending on the model, and mixed batches are accepted. Adding your logo to a stock colourway starts at 50 pcs per colour. An ODM colour outside the stock range starts at 300 pcs per colour, with up to two colours per order. Custom production runs around 40 days after artwork and sample approval.
Can I mix several models in one order?
Ready-to-ship stock ships from low minimums — 1–2 pcs depending on the model, and mixed batches are accepted. Adding your logo to a stock colourway starts at 50 pcs per colour. An ODM colour outside the stock range starts at 300 pcs per colour, with up to two colours per order. Custom production runs around 40 days after artwork and sample approval.
Can I order two colours of the same custom model?
Yes — custom projects allow up to two colours, which is the usual way buyers launch a colour range without over-committing.
How long does production take?
Custom production is typically around 40 days after artwork and sample approval. In-stock models ship from stock.
Do you supply samples?
Yes. Stock samples are normally dispatched within 3–5 days. Custom sample timing is confirmed with the quotation because it depends on the model and the changes involved.
Customization
Customization
What can be customized?
Logo printing, private-label placement, frame colour, lens colour and function, nose-pad colour, and packaging (case, pouch, cloth, hangtag, retail box).
Can you match my Pantone colours?
Yes — send the Pantone codes and we confirm the closest achievable match on the frame, temples, nose pad and lens coating.
Can I use my own branded packaging?
Ready-to-ship stock ships from low minimums — 1–2 pcs depending on the model, and mixed batches are accepted. Adding your logo to a stock colourway starts at 50 pcs per colour. An ODM colour outside the stock range starts at 300 pcs per colour, with up to two colours per order. Custom production runs around 40 days after artwork and sample approval.
Do you support prescription (RX) wearers?
Several models accept an optical inner frame: KC01-01, KC01-02, KC02-03, KC06-13A, KC07-15K and KC08-16K from the cycling range, and KD02-02 with its groove system. Availability is confirmed per model.
Products & materials
Products & materials
Which lens materials can I choose?
Depending on the model: TAC, PC 1.8, PC polarized or nylon polarized. Each model page lists the options for that frame.
Are any frames floatable?
Floating material is available on the KA, KB and KM series only — useful for fishing and waterside use. Cycling and semi-rimless models cannot be made in floating material.
Which lens category should I order?
Category 2 (18–43% transmission) suits general outdoor use; Category 3 (8–18%) suits strong sunlight, water and snow. Sunglasses are not suitable for driving in twilight or at night.
Do your lenses block UV?
UV400 performance is recorded in the laboratory test reports on file. Copies are available on request, and we confirm the applicable report for the lens you order.
Compliance & quality
Compliance & quality
Are your products CE compliant?
We supply models covered by a CE Certificate of Conformity to EN ISO 12312-1:2022 under PPE Regulation (EU) 2016/425, including KC06-13A, KC07-15K and KC08-16K. For other models we confirm the applicable documentation with your quotation.
Do you provide documentation for the US market?
Yes — impact-resistance testing under FDA 21 CFR 801.410 and a factory FDA establishment registration.
Do you test to ANSI and Australian standards?
Yes. Lens test reports cover ANSI Z80.3:2018 and AS/NZS 1067.1:2016 for both TAC and PC lens types.
What about EU packaging regulations?
Registrations are in place for Germany (packaging register DE4509174906955) and France (EPR, UIN FR393014_01SRCF), which matters for your own EPR reporting as an importer.
How do you control quality?
The specification is confirmed in writing before production, the sample is approved before the bulk run, and goods are inspected before packing. Third-party inspection (SGS, BV, TÜV) is welcome at buyer’s cost.
Shipping, payment & working together
Shipping, payment & working together
What are your payment terms?
Payment terms are agreed per order and written into the proforma invoice, so you always see them before any deposit is paid.
Which trade terms do you work on?
Terms are agreed per order and stated on the proforma invoice. Tell us your port or delivery address in the enquiry and we quote accordingly.
Which markets do you serve?
Distributors, importers, retailers, sports brands and promotional buyers in Europe, North America and Australia/New Zealand. Business communication is in English.
Are you a factory or a trading company?
WORLUX is operated by Xiamen Moushi Trading Co., Ltd., a Xiamen-based supply-chain company. We coordinate production with partner factories, and we hold the customization, documentation and follow-up side of the project.
How quickly will I get a reply?
We reply to enquiries with a clear brief as quickly as we can, normally within one business day. The more specific your brief, the faster the answer — see the checklist on the ordering terms page.
Let’s Work Together
Still Have a Question?
Send it with your target market and quantity — you will get a specific answer rather than a brochure.